Craftsman Snowblower Parts
Craftsman made a wide range of snowblowers, Single Stage, Two Stage and Three Stage. They range from 21 inch to 28 inch width capacity.
The majority of their snowblowers have electric start systems, and those that don’t can normally be fitted as an optional extra.
Craftsman snowblowers are lightweight, easy to operate, dependable and quiet. They have an ability to clear snow quickly and efficiently.
Most snowblowers will at some point need spare parts, either for routine servicing and maintenance, or if for any reason the machine needs repairing. Having a copy of the snowblower manual is really important for a number of reasons.
Craftsman Snowblower Manual
The manual gives important information about safe operating practices, very important to read as there is potential for real damage if the snowblower is not used correctly.
Quite often new snowblowers arrive out of the box as it were and need to be assembled. A craftsman snowblower manual will give you the information and diagrams about how to assemble a snowblower.
Most manuals also include illustrated diagrams of the workings of the engine and other associated parts.
Such a diagram is really important, not only in assembling the machine, but also in being able to identify which parts need replacing, and how new ones should be installed.
The manual should also include a troubleshooting section which will give information on the most common problems people have with the snowblower.
This includes things like problems with starting it, and how best to keep the auger free of snow.
The snowblower manual also have a detailed section on servicing and maintenance.
This is essentially the manufacturers recommendations and should be closely followed.
This is important not only for the smooth running of the snowblower itself, but also to make sure it complies with the warranty.
The manual should give information about the Craftsman warranty itself.
There are normally some differences if the snowblower is used for commercial operations, and as such there are likely to be separate residential and commercial warranties on the machine
It is likely that the engine itself, if made by a separate manufacturer, will have a separate warranty as well. Details of all these should be included in the manual.
Finally, the manual should contain full details of customer support. This should include the headquarters of the company, phone numbers and e-mails and any other way to contact them.
Craftsman Snowblower Parts
Below are listed the main categories of Craftsman snowblower parts, followed by a more detailed breakdown of which parts are normally available, and for which specific part of the snowblower they are needed for.
Craftsman Snowblower maintenance sets
Craftsman Snowblower belts
Craftsman Snowblower shave plates
Craftsman Snowblower shear pins
Craftsman Snowblower slide shoes
Craftsman Snowblower cables
Craftsman Snowblower friction wheels and discs
Craftsman Snowblower augers
Craftsman Snowblower engine parts
Craftsman Snowblower hardware
Craftsman Snowblower pulleys
Craftsman Snowblower tires and wheels
Craftsman Snowblower discharge chutes
Craftsman Snowblower auger gearboxes
Craftsman Snowblower Parts – Detailed Breakdown
Auger Parts –
- Auger bearings
- Auger paddle
- Impeller
- Impell fan
- Hub assembly
- Plate cowl retainer
Axles
- Differential axle
- Hex shaft
- Axle shaft
- Short axle with bushings
- Long differential axle
- Axle weight – lbs 10/30
Batteries and Accessories
- Battery charger
- Battery cover
- Dual port charger
Bearings and Washings
- Bearings
- Ball bearing
- Fang baring
- Radial bearing
- Struggling bearing
- Flange
- Polyline
- Sealed
- Sleeve
- Slinger
- Spacer
- Spindle
- Steeled housing
- Height
- ID
- Material
- OD
- Size
- Type
- weight
- Width
Belts –
- Belt keeper
- Belts by size
Brakes
- Brake assembly
- Brake components
- Brake linkage
- Brake pads and shoes
- Auger impeller brake pad
- Brake arm assembly
- Brake arm with pad
- Brake lining
Breather
Camshaft
- Interlock camp
- Camshaft
- Differential can
- Camshaft assembly
Carburettors
- Carburettor bowls,
- Carburettor gaskets,
- Carburettor kits,
- Carburettor nozzles
- Choke lever is
- Diaphragm kit
- Foats, pins and kits
- Gasket set
- Main jet
- Needles valves and kit
- Climate bulbs
- Springs
Chutes and deck size
Clamps
Clevis pins
Clips
Clutches
- Dog sliding clutch
- Clutch chain
- Fork Clutch
- Clutch paddle
- Clutch gear
- Clutch paddle sleeve
- Clutch arm with brake pad
- Jaw clutch
- Right hand clutch lever grip
Connecting rods
Cotter pin
Couplers
Crankshaft
Cylinder head
Decals
- Rotating danger decal
- Differential lock decal
Dipstick
Discharge chute
- Chute gear
- Chute assembly
- Outer retaining ring
- Worm mounting bracket
- Inner retainer ring
- Discharge chute base
- Chute actuation dear
- Worm gear chute
- Chute flange keeper
- Quarter discharge bracket
- Chute crank knob
- Deflector
- Lower chute
- Chute retainer
Drift cutter
Drive chain
Drive components
- Gear
- Pinion shaft frame repair kit
- Differential remote
- Automatic differential
- Pinion shaft
- Hex shaft
- Pin
- Hub assembly lockout
- Pinion sprocket
- Ratchet dear
- Shift carrier
- Pinion shaft assembly
- Disk hub
- Slider ring assembly
Drive sprockets
Driveway marker
Just plug
Electric starter kits
Engines
- Displacement
- Grade
- Power
- Shaft size
Fan blade
Fittings
- Dual cable fitting
- Grease fitting
- Zerk fitting
- Hydraulic drive fitting
- Straight loop fitting
- Cable z fitting
- Fitting
Flywheels
Frames
Cover bottom
Frame
- Bottom frame cover
- Frame traction
- Tractor frame
- Frame assembly
Friction disc
Fuel filters, lines and parts
- Elbow fittings
- Fuel filters
- Fuel line
- Fuel line fitting
- Fuel line shut-off
- Fuel parts
- Hose clamp
- In-line fuel shut-off
- Climate bulbs
- Shop packs
Fuel tanks
- Fuel tank
- Fuel tank bushing
- Fuel tank on/off valve
- Fuel tank strainer
- Gas tank
- Fuel tank nipple
Gas and oil
Gaskets
- Air cleaner gasket
- Base gasket
- Carburettor gasket
- Cylinder head gasket
- Gasket set
- Head gasket
- Insulator gasket
- Intake gasket
- Muffler gasket
Gauges
- Fuel gauge assembly
Gear case
- Housing reducer assembly
- Cast iron gear case
- Shaft and worm gear kit
- Impeller shaft
- Role him
- Gear case assembly
- Auger Gearbox Assembly
Gloves
Governor
Handles
Headlight bulbs
Hinge pins
Hitch pins
Hose Clamps
- Tube Clamp
- Hose Clamp
- Hose Wire Clamp
Hubcaps and wheel covers
Idlers
Ignition parts
- breaker ignition
- breaker points
- condenser
- flywheel keys
- ignition coils
- ignition kits
- ignition set
- modules
- plunger breakers
- voltage regulators
Ignition switches and keys
Light Kit
Linchpins
lubricants chemicals and oils
Lubrication systems
Maintenance kits
Mounts
- Shaft support
- Bracket
- Idler arm
- Caster Leg Weldment
Mufflers and accessories
Nuts, bolts and screws
Oil Drain
- Petcock Assembly
Oil extractor
Oil plug
Oil seals
Pinion gear
Pistons and piston rings –
- Piston kits
- Piston rings
- Pistons
- Pivot pins
- Ring sets
Power brushes
Power cords
Pulleys
- Drive pulleys
- Engine pulleys
- Flat idler
- Idler pulleys
- Pulley flat idler
- Pulley hub
- Blower Sheave
Push rod
Retainer ring
Rings
Rivets
Rocker Arms
Role pin
Roller chain
Rubber tracks
Safety, interlock, PTO switches
- Interlock switches
- PTO switches
- Toggle Switches
Scraper blades
Seals
Sheer pin
Skid shoes
Snap rings
Solenoids
Spark plugs and accessories – hex size, thread and type
Spindles
Starter parts
- Starter brush kits
- Starter clubbers
- Starter dried parts
- Starter handles
- Starter pawls
- Starter pulley
- Starter recoil assemblies
- Starter rope
- Starter springs
Starters
Steering
- Steering assembly
- Steering ball joint
- Steering gear
- Steering rod
- Steering spindles
Throttle and control cables
- Auger cable
- Brake and clutch levers
- Chute deflector cable
- Chute lock cable
- Control assembly
- Control cables
- Controlled choke
- Differential cable
- Push pull controls
- Remote wheel lock cable
- Shift rods
- Throttle access
- Throttle cables
- Throttle conduit and clips
- Throttle controls
- Traction cable
Tiedowns and straps
Tire chains
- Snow Hogg two link tire chains
- Twist link two link tire chains
- Twist link four link tire chains
Tires
Transmission
- Gear assembly
- Chute rotation gearbox
- Tooth gear,
Triggers
Valve stems
Valves
- Exhaust valves
- Intake valves
- Valve caps
- Valve guide
Weight kit
Wheel Accessories
Wheel hubs
Wheel rims
- Compression wheel
- Rim/hub assembly
- Rim
Wheels
Wiring harness
Worm gears
- Worm gear
- Worm shaft
- Worm and gear service assembly
- Worm shaft assembly
- Worm shaft